Industry News | EnergyNorthwest.com

Sale of FitzPatrick Nuclear Plant Final

April 5, 2017

The James A. FitzPatrick nuclear power plant officially belongs to Exelon Generation. The sale of the Scriba, NY plant, finalized on March 31, has been long-expected.

“We look forward to bringing FitzPatrick’s highly skilled team of professionals into the Exelon Generation nuclear program, and to continue delivering to New York the environmental, economic and grid reliability benefits of this important energy asset,” Chris Crane, president and CEO of Exelon, said in a release.

The FitzPatrick plant, an 838-MW boiling water reactor commissioned in July 1975, was put on the chopping block in late 2015 by then-owner Entergy Corp. The company cited economics in its decision to power down the plant, saying it was no longer feasible to run the plant in the current climate.

Exelon and Entergy announced in July 2016 that they were working to strike a deal for the sale of the plant. The announcement came shortly after the New York Department of Public Services released a proposal to subsidize zero-emissions nuclear plants upstate.…

High-Performance Oil Reduces Varnish and Saves Money for Gas Turbine Power Plant

April 3, 2017

| No Comments

| Industry News

Varnish buildup in oil systems and components can degrade performance and cause erratic valve operation. Some experts have conducted research and formulated new lubricants that could help solve those problems. One such oil proved highly successful during a five-year run at a gas turbine power plant. By eliminating the need for oil changes and valve maintenance at the site during the trial period, the oil even saved money compared to previously used formulations.

The formation of varnish by turbine oils is not a new phenomenon. However, it has become an intense topic of discussion over the last several years because of the resulting downtime, decrease in reliability, and loss of productivity it causes in the power industry. There are a few significant factors that contribute to this issue.

Dynamics Behind Varnish Formation

Through intense focus on asset reliability and operational efficiency, end users have begun to push limits and increase the performance of their power units. The same focus by original equipment manufacturers (OEMs) has led to higher performing equipment.…

THE BIG PICTURE: Prevailing Winds

April 1, 2017

| No Comments

| Industry News

The post THE BIG PICTURE: Prevailing Winds appeared first on POWER Magazine.

POWER Magazine…

U.S. Nuclear: From Hope to Despair

March 30, 2017

| No Comments

| Industry News

A decade ago, the annual Platts nuclear energy conference in Washington was brimming with optimism over a coming “nuclear renaissance,” as licensing requests poured into the Nuclear Regulatory Commission and companies announced ambitious plans for new nuclear construction. Ten years later, the not-so-under-the-surface theme of the conference was nuclear survival.

“The question is survival,” former Entergy nuclear executive Bill Mohl told attendees at the annual Platts nuclear energy conference in Washington, D.C., in early February. Mohl, who led Entergy’s merchant power business and retired February 28, went on to explain that Entergy’s long-term strategy of buying up single-unit nuclear plants at bargain-basement prices and bidding them into the regional transmission operator (RTO) and independent system operator (ISO) competitive wholesale markets was a miserable failure.

It seemed like a really good idea at the outset, but a combination of factors undercut the strategy, and Entergy is now exiting merchant nuclear power in as big a way as it entered. Vermont Yankee is shuttered.…

Reports of the Electric Grid’s Death Have Been Greatly Exaggerated

March 28, 2017

| No Comments

| Industry News

There have been numerous pronouncements recently about the upcoming demise of the bulk power grid as consumers are projected to move toward decentralized green energy sources. We don’t believe that the end of the electric grid is nigh upon us.

Investment in Transmission Grows

In the last decade, low load growth in the U.S. has been accompanied by continued transmission growth. Although the percent of load growth is declining or flat nationwide, investment in the transmission system is increasing. In addition, recent trends suggest that decarbonization efforts—installation of renewable resources and distributed energy resources—will likely be accompanied by increasing transmission expansion. Other factors are contributing to the increased transmission system investment as well.

Annual electric load growth has trended downward over our lifetimes, from 9.8% annual growth in the 1950s to 0.7% in the first decade of the 21st century. Nonetheless, the load itself continues to grow as does transmission system investment. Annual investment in the transmission system increased from around $ 2 billion in 1997, to $ 14 billion in 2012, an annual growth rate of almost 14%.…

New Approaches for Transformer Operation and Maintenance

March 26, 2017

| No Comments

| Industry News

ABB Transformer resilience image 2

Technology advancements and new regulatory requirements could reshape how power plant owners operate and maintain large power transformers. Experts outline emerging strategies and call attention to overlooked components that could help prevent transformer failure.

Power transformers are arguably one of the most expensive and vital components in a power system. While they are typically reliable and relatively low-maintenance, sudden failures can result in the loss of power generation along with considerable costs and potentially wider implications for grid reliability.

According to SPX Transformer Solutions, a U.S. maker of medium and large power transformers, and which is also a transformer service solution provider, electrical disturbances are a leading cause of power transformer failure. An analysis it conducted of major failures between 1991 and 2010 (Figure 1) showed that phenomena such as switching surges, voltage spikes, line faults/flashovers, and other utility abnormalities are overwhelmingly responsible for transformer failures. Insulation, moisture, and foreign objects were also notable causes.

10_PWR_040117_COV Transformer_p38-41.indd

1.

…