Your Source for Energy Jobs & Industry News
Recently Mechanical Dynamics & Analysis (MD&A) completed a complex, multiple-component combined-cycle major inspection and refurbishment project that successfully brought both turbines and both generators back to full and reliable operations. The 474 MW combined-cycle plant was depending on the complete and efficient renewal of its Unit 2 system. This major project demonstrates..
Energy Central…
In July 2016, a coal silo collapsed at an Indiana power plant. The root cause was identified as cracking of the cone-to-skirt weld. Warnings to inspect this vulnerable weld were published widely in conference proceedings and trade journal articles. Nevertheless, coal silos continue to fail at an alarming rate (Figure 1), which suggests that the needed inspections weren’t completed by all power producers.
 |
| 1. Recent failures of cone-to-skirt welds on large coal silos point to the need for ongoing inspections. Courtesy: Joe W. Frey Engineering Associates, LLC |
If you have any of these suspended cone silos (Figure 2) in your plant and are not yet doing non-destructive evaluation (NDE) inspections of their cone-to-skirt welds, then you need to start today.
 |
| 2. Coal silos like this need our immediate attention! Courtesy: Joe W. Frey Engineering Associates, LLC |
Granted, this particular design is a real challenge to inspect, because the silo’s liner seals over the galvanic cell (in layman’s terms, a corrosion sandwich) that is created at the union of the stainless-steel liner and the carbon-steel structure.…